Conduit Bending Calculator – EMT Offsets | WattsCalc

# Conduit Bending Calculator – EMT Offsets | WattsCalc > Conduit bending calculator for offsets, 90° stub-ups, and 3- or 4-point saddles. Shrink and take-up for 1/2-inch, 3/4-inch, and 1-inch EMT. ## Pages - [Conduit Bending Calculator – EMT Offsets | WattsCalc](https://wattscalc.com/): Conduit bending calculator for offsets, 90° stub-ups, and 3- or 4-point saddles. Shrink and take-up for 1/2-inch, 3/4-inch, and 1-inch EMT. - [Conduit Fill Calculator – Dimension Fill Planner | WattsCalc](https://wattscalc.com/conduit-fill-calculator/): Educational conduit fill calculator from measured internal diameter and cable OD. Compare fill% to general 53%/31%/40% bands. Not a code compliance tool. - [Cable Tray Fill Calculator | WattsCalc](https://wattscalc.com/cable-tray-fill-calculator/): Estimate cable tray fill from usable width, loading depth and cable OD. Compare the percent with your own limit. Educational area maths, not a code approval. - [Conduit Bending Cheat Sheet & Chart | WattsCalc](https://wattscalc.com/conduit-bending-cheat-sheet/): Conduit bending cheat sheet with reference multipliers, shrink constants, 90° take-up, and common EMT offset heights. Printable field chart. - [Conduit Shrink Chart & Constants | WattsCalc](https://wattscalc.com/conduit-bending-shrink-chart/): Conduit shrink chart for EMT offsets: what shrink is, why a short stick misses the box, and reference shrink constants from 10° to 60°. - [Conduit Shrinkage Chart for EMT & Rigid](https://wattscalc.com/conduit-shrinkage-chart/): Conduit shrinkage chart for offset bends: shrink per inch of height from 10° to 60°, with the matching multipliers. Verify on scrap before you cut. - [Conduit Offset Calculator (EMT & PVC)](https://wattscalc.com/conduit-offset-calculator/): Conduit offset calculator: enter height and angle, read mark spacing and shrink. Optional first mark, fractions, and an IN/MM switch. - [EMT Offset Multiplier Chart (Degrees & Multipliers)](https://wattscalc.com/emt-o